Siig

2-port HDMI 2.0 Splitter, 18Gbps 4K 60Hz HDR, EDID modes selection, 7.1Ch Audio, HDCP 2.2/1.4, Aluminum metal housing, ESD protection, TAA Compliant, 3 years warranty

Boost your productivity by connecting three HDMI displays to single DisplayPort 1.4 output with Multi-Stream Transport (MST) technology Provides multiple display modes for various applications such as Mirror mode* same content on each display, Extended mode with individual content on each display, and Panoramic Video Wall mode** which combines multiple monitors to use as one large display Note: *Mirror mode using a NVIDIA Surround technology graphics adapter is limited to 2 displays. **Video Wall mode requires either a AMD Eyefinity, Intel, or NVIDIA Surround technology graphics adapter Total Bandwidth 32.4Gbps (Max): Supports one UHD 8K (7680 x 4320)@30Hz display, two 4K@60Hz displays, or three 4K (3840x2160)@30Hz or less display. Other resolution combinations which are less than or equal to 4K@30Hz will work also. For example, three 2K, three 1080p, 4K+2K+1080p etc Note: The total combined bandwidth among all connected displays must NOT be exceeded the total bandwidth of 32.4Gbps Compatible with DisplayPort 1.4 MST graphics cards with AMD Eyefinity, Intel Collage or NVIDIA Surround technology Support 4K HDR and HDCP 2.2 Reset button allows re-detection of all the displays if any of the displays are not detected Plug-n-play, trouble-free set up without complicated hardware or driver installation Premium aluminum housing with embedded woven braided DisplayPort cable decreases surrounding interference and provides optimal video quality Compatibility Notes : - Requires either AMD Eyfinity or Intel Collage or NVIDIA Surround technology graphics adapter for Video Wall mode - Requires a DisplayPort 1.4 graphics card to support minimum of 3 external displays - Mirror mode using Windows Display Uility and NVIDIA Utility is limited to 2 displays - Requires USB 3.0 power source of at least 5V/600mA

4K DisplayPort 1.4 to DisplayPort MST Hub Splitter

4-port HDMI 2.0 Splitter, 18Gbps 4K 60Hz HDR, HDR to SDR convertion, Intelligent Downscale, EDID management, 7.1Ch Audio, HDCP 2.2/1.4, Aluminum metal housing, F/W update, ESD protection, TAA Compliant, 3 years warranty

2x1 HDMI 2.0 KVM Switcher, 18Gbps 4K 60Hz HDMI Video Output  Console Switch, 4x USB 2.0 Hub, 3.5mm MIC and Audio, Scroll Lock & Ctrl Hot keys, w/Windows & Mac system, TAA Compliant , HDMI cable included.

Extends and transmits 4K@60Hz HDMI 2.0 video/audio and USB 2.0 signals up to 230ft (70m) through a Cat6/6a/7 network cable with nearly with zero latency Supports USB 2.0 extension to the receiver, allowing you to connect a wired/wireless keyboard and mouse to control your computer remotely Supports digital audio extraction through the receiver's S/PDIF port, with PCM 2ch, Dolby, DTS 5.1 The transmitter's HDMI loop-out allows for local monitoring of the extended display The transmitter can work as an HDMI splitter with the additional HDMI output design, and allows screen mirroring to another display device Lightning protection, surge protection, ESD protection Plug and play, no driver installation required High quality metal housing with ventilation panels improve heat dissipation and ensure system stability during long hours of operation

Dual Head 2x1 KVM Switcher, DP & HDMI Hybrid video input, 4K 60Hz HDMI Video Console Switch, 4x USB 2.0 Hub, 3.5mm MIC and Audio, Scroll Lock & Ctrl Hot keys, w/Windows & Mac system, TAA Compliant

Extends 1080p HDMI signal up to 394ft over Cat6 cable to up to 4 displays, IR control, works with dedicated Gigabit network switches for more displays and extension

Control up to four computer displays on a single monitor using a single  keyboard and mouse. Single-head HDMI KVM switch supports 1080P/60 and mouse roaming.  Built-in USB 3.1 Gen1 four-port hub

Extends 1080p HDMI signal up to 394ft over Cat6 cable to up to 8 displays, IR control, works with dedicated Gigabit network switches for more displays and extension