Designed for auditoriums with screens up to 65-feet wide, NEC's NC2000C DLP cinema projector captivates audiences with crisp video images. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (2200:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance.
3D content utilizes the projector's full 2K resolution using triple flash technology for smooth motion
Memory functions for lens position and lamp output simplify frequent operation
Lamp changes can be made from the back of projector
Direct selection buttons for eight stored projector configurations
Projector can be controlled from an optional touchscreen
Auto lamp brightness control maintains constant brightness by adjusting the lamp power as it ages
Standard film projector lamps can be used (lamp adapter required
Projection Method
3-chip DMD reflection method
Primary Lenses
For 0.98” DLP Chip: 1.3 to 1.75:1 zoom / 1.4 to 2.05:1 zoom / 1.59 to 2.53:1 zoom / 1.9 to 3.25:1 zoom / 2.4 to 3.9:1 zoom / 3.9 to 6.5:1 zoom
Lens Adjustment Functions
Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens
Light Output
18,300 lumens when using NEC 4.0KW highefficiency Xenon lamp bulb
Contrast Ratio
2200:1 (full on/off)
Resolution
2048 x 1080
Lamp Bulbs
NEC high-efficiency Xenon (NEC 4.0KW lamp bulb / NEC Long life Xenon (NEC 4.0KW lamp bulb)
Supported Screen Size (maximum)
65 ft. / 20m
Cooling Method
Liquid cooling inside, air cooling with dustpreventing electrostatic filter
Total thermal dissipation: 18800BTU (Input 4KW power to NEC 4.0KW lamp bulb)
Projector exhaust: Top mounted
Demand of exhaust duct: 460CFM (13m3/min)
FanNoise
< 62dB
Power Consumption
Projector power supply unit: 500W
Lamp power supply unit: 5000W
Total: 5500W
DMD Specifications
0.98” DLP chip, 12º tilt angle
Input Terminals
HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2
External Control
LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 / General purpose I/O for 3D (D-sub [15-pin] x 1) / Remote control connector x 1
Power Supply Voltage
C1 Connection
Projector and Lamp power supply unit:
200 to 240V AC, 50/60Hz, single phase
C2 Connection
Projector power supply unit:
100 to 240V AC, 50/60Hz,single phase
Lamp power supply unit: 200 to 240V AC, 50/60Hz, single phase
External Dimensions
27.6 x 39 x 19.80 in. / 700 x 990 x 503mm
Excluding lens, lens hood and exhaust stack. Including feet.
Weight
218 lbs. / 99 kg
Excluding lens and lamp bulb.
Environment
Operational temperatures: 50-95°F / 10-35°C
Humidity: 10% - 85% (non-condensing)
Storage temperatures: 14-122°F / -10 50°C
Humidity: 10% - 85% (non-condensing)
Regulations
USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A / Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) / Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) / Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)
Limited Warranty (parts & labor)
2 years
Ships With
User manual
Optional Accessories
Wide converter lens (NC-80LS13F)
Electric turret for NC-80LS13F
Built-in alternative content processor (MM3000B)
HDCP-compliant DVI input board (MM-70DV01)
Analog/RGB input board (MM-RGB)
Single HD-SDI input board (MM-SDI)
Video input board (MM-Video)
6xA/filter with every lamp replacement (NC-80AF01)
4xA/filter for exchange every 4000-5000 hours (NC-80AF02)
Lens 1.2-1.8 (NC-60LS12Z)
Lens 1.4-2.05 (NC-60LS13Z)
Lens 1.4-2.05 (NC-60LS14Z)
Lens 1.59-2.53 (NC-60LS16Z)
Lens 1.9-3.25 (NC-60LS19Z)
Lens 2.4-3.9 (NC-60LS24Z)
Lens 3.9-6.5 (NC-60LS39Z)
